![[PLACEHOLDER: photo — finished Bike Light Kit build]](/images/placeholder.svg)
Bike Light Kit
Beginner-friendly, some soldering required — see the safety guide
$10 CADconfirm at launch
+ $4 shipping (Canada), calculated at checkout for other countriesrate not final
Buy the kit[PLACEHOLDER: Stripe Payment Link URL — Bike Light Kit]
What's in the kit
- XP-L2 LED (19.8mm MCPCB)
- Heat sink
- Driver board [PLACEHOLDER: confirm final driver board choice — Type-C combo board vs. backup]
- Two switches (power, brightness)
- Lens disc, 22mm [PLACEHOLDER: not yet in the BOM — confirm sourcing, see design notes]
- O-ring, 2.0mm CS [PLACEHOLDER: not yet in the BOM — confirm sourcing, see design notes]
- Wire
- Heat shrink
What you provide
- 3× harvested battery cells (13350, ~3.7V/500mAh each)
- 3D-printed housing (your printer or a library makerspace)
- Basic tools (soldering iron, wire strippers)